So a buddy of mine gave me a FLI Audio FU10. Apparently this is a UK brand? Anyone have any experience with these speakers? Looking at the passive enclosure it's only 1/2" MDF so I don't expect too much performance from it.
Edit* FLI website http://www.fliaudio.co.uk/
Speaker size : 10” (272mm)
RMS power : 250 watts
Peak power : 800 watts
Minimum input : 125 watts RMS
Sensitivity : 85 dB
Frequency response : 30Hz – 1700Hz
Mounting diameter : 247mm
Mounting depth : 106mm
![]()
AND !!! I was also going through some old boxes and found an old Rockford Fosgate Punch 600a4 amp and an old Kenwood 2ch amp. Now all I have to pickup is the PAC and my wiring. This will be a decent startup setup until I can pickup my ARC Audio system.
Edit* FLI website http://www.fliaudio.co.uk/
Speaker size : 10” (272mm)
RMS power : 250 watts
Peak power : 800 watts
Minimum input : 125 watts RMS
Sensitivity : 85 dB
Frequency response : 30Hz – 1700Hz
Mounting diameter : 247mm
Mounting depth : 106mm
AND !!! I was also going through some old boxes and found an old Rockford Fosgate Punch 600a4 amp and an old Kenwood 2ch amp. Now all I have to pickup is the PAC and my wiring. This will be a decent startup setup until I can pickup my ARC Audio system.