Just poking around for opinions and ideas from the great resources of this board.
Here's what I've accumulated so far for a good SQ system:
- New Pioneer DEH-80PRS head unit (5v Pre-outs; great SQ; plan on running it in network mode for high, mid, and low).
- JL HD900/5 amp (100 x 4, 500 x 1; <.03 THD @ 4 ohm).
- Orion HCCA 250 amp (3rd Gen old school "Pop Top"; cheater amp capable of 800w bridged).
- Polk MM6501 6-1/2" component speakers for front doors (125w continuous; 250w peak).
- (1) JL 10W6v2-D4 sub (600w RMS; dual 4-ohm VC)
I don't know if I'm too crazy about the single 10" sub; it just didn't have the punch I was looking for. It's mounted in a sealed box at exactly the dimensions that JL put in their instructions. And yes, I've learned now after reading a lot on this web board on who to consult about a box design.
Thoughts on the selected products and / or recommendations on what to add to make this a great system, and / or tips & tricks from lessons learned?
Thanks
Here's what I've accumulated so far for a good SQ system:
- New Pioneer DEH-80PRS head unit (5v Pre-outs; great SQ; plan on running it in network mode for high, mid, and low).
- JL HD900/5 amp (100 x 4, 500 x 1; <.03 THD @ 4 ohm).
- Orion HCCA 250 amp (3rd Gen old school "Pop Top"; cheater amp capable of 800w bridged).
- Polk MM6501 6-1/2" component speakers for front doors (125w continuous; 250w peak).
- (1) JL 10W6v2-D4 sub (600w RMS; dual 4-ohm VC)
I don't know if I'm too crazy about the single 10" sub; it just didn't have the punch I was looking for. It's mounted in a sealed box at exactly the dimensions that JL put in their instructions. And yes, I've learned now after reading a lot on this web board on who to consult about a box design.
Thoughts on the selected products and / or recommendations on what to add to make this a great system, and / or tips & tricks from lessons learned?
Thanks